|
|
klober
underlays
permo forte
Permo
Forte is a strong laminated sheet material, with outer layers of
polypropylene, an inner layer of microporus polyethylene film and re-inforcement
mesh.
- Very strong and robust
vapour permeable underlay.
- Water-proof Four- layer
material.
- BBA, IAB and CE certified.
- Suitable for non
ventilated cold and warm roof applications.
- No ventilation of the roof
void required.
- UV Stable for four months.
- Hydrophobic treated.
- Permo Forte SK includes a
self-adhesive tape.
permo
lite
Permo Light
is a three-layer vapour permeable roofing underlay for use on pitched
roofs. Permo Light is a strong laminated sheet
material, with outer layers of polypropylene, and an inner layer of
microporus polyethylene film.
- Very strong and robust
vapour permeable roofing underlay.
- Water-proof Three- layer
material.
- BBA and CE certified
- Suitable for non
ventilated cold and warm roof applications.
- No ventilation of the roof
void required.
- UV Stable for four months.
- Hydrophobic treated.
- Allows the roof structure
to breathe yet fully waterproof.
permo
frame
Permo
Frame is a single ply non woven spun bond polypropylene membrane
- Strong vapour permeable
Timber Frame underlay.
- Single Ply spun bond
polypropylene membrane
- BBA, IAB and CE certified
- U.V. Stable for four
months
- Water-proof
- 2.7m Wide rolls for
factory assembled buildings
- 1.5m wide rolls for site
use
permo
sec
Permo Sec is
a vapour permeable waterproofing barrier that is installed as a separating
layer between copper, Zinc, Aluminium and stainless steel standing seam
roof finishes and the supporting deck. 5 Layer
Fleece Foil Combination of Polyolefin, Hydrophobic Treatment and PP
Monofilament Mesh.
-
Can be
laid on rigid insulation or timber boarding.
-
Suitable
for roof pitches above 3°.
-
Any
moisture build up between the outer metal roof covering and the Permo
Sec will be channelled safely to the eaves due to the nature of the
8mm mesh outer layer.
-
With an
accoustic value of 8db, Permo Sec will help to reduce the transmission
of external structure borne sounds e.g. rain hammer.
-
Will
cover any irregularities within the roof deck, that could de-form the
metal roof covering.
-
Provides
a fully waterproof secondary barrier to moisture penetration.
-
Permo
sec will not bond with the under side of the outer covering in hot
conditions.
-
Allows
movement between the outer covering and the structural deck.
-
CE
certified
permo
air
Permo® air
is the most breathable air open low resistance underlay on the market. It
is the ideal solution where there is a high risk of condensation forming
in the roofspace. Permo® air is a strong 3 layer
product consisting of UV stabilised PP fleece and a high performance
Meltblown layer.
-
Air open
& vapour permeable
-
Over 13%
more breathable than any other ‘air open’ underlay on the market
-
Lowest
vapour resistance of all breathable membranes
-
Being both
air open & vapour permeable further minimises the risk of
condensation forming, particularly during the drying out period of a
building
-
No
ventilation required
-
BBA and CE
certified for cold and warm roof applications
-
Available in
2 widths: 1.5 x 50m & 1m x 50m
-
Hydrophobically
treated Type LR underlay Strong 3 layer material 15 year guarantee
Recyclable UV stable for 4 months
-
Batten
spacing 350mm Superior nail tear strength
|
|
Contact
us for more information
|
